Reviewed by the Benton Metal Depot team · Updated
Do you need more room for vehicles, tools or equipment in Enigma? A metal garage might be the solution! It gives you enclosed space without adding onto your house or existing building. Benton Metal Depot supplies metal garage packages throughout Berrien, with buildings that you can plan around according to what you need to park, store or work on.
Key Points
- ◦Benton serves Gladys, Glory, Alapaha and Allenville and other communities around Enigma.
- ◦In Enigma, a building permit is required once the garage exceeds Not found — no published sqft exemption for accessory structures located on the county site. The office does issue building permits generally, but no specific threshold was found. Needs direct confirmation (229-686-2149, option 2). square feet.
- ◦Check the permit and setback rules before deciding exactly where the garage will go.
- ◦Plan for door clearance and walking room when deciding how wide your garage needs to be.
- ◦The current local setback for a metal garage is Not confirmed — the county notes its zoning ordinance "includes...building size and setbacks" but specific figures were not extractable via search. Needs direct confirmation or review of the full ordinance on Municode..
At a Glance
| Permit threshold |
Not found — no published sqft exemption for accessory structures located on the county site. The office does issue building permits generally, but no specific threshold was found. Needs direct confirmation (229-686-2149, option 2).
As of 2026 · Source |
|---|---|
| Setback (side/rear) |
Not confirmed — the county notes its zoning ordinance "includes...building size and setbacks" but specific figures were not extractable via search. Needs direct confirmation or review of the full ordinance on Municode.
As of 2026 · Source |
| Wind load zone |
Inland Georgia — roughly 110-120 mph (ASCE 7, Exposure C). NOT a verified figure; exact design wind speed depends on the ASCE 7 edition Berrien County has adopted and must be confirmed with a GA-licensed engineer or the county building official.
As of 2026 · Source |
| Panel type/gauge |
29-gauge and 26-gauge Rib panels -- Benton's existing standard gauge/profile for pole-barn, carport, and agricultural structures.
As of 2026 · Source |
| Drive time from Statesboro |
215
As of 2026 · Source |
Permits & Setbacks in Berrien County
Before a metal garage goes up in Enigma, check with Berrien County Code Enforcement Office (Planning and Zoning) — Berrien's cutoff for requiring a building permit is Not found — no published sqft exemption for accessory structures located on the county site. The office does issue building permits generally, but no specific threshold was found. Needs direct confirmation (229-686-2149, option 2). square feet. Below that, you still need to clear the Not confirmed — the county notes its zoning ordinance "includes...building size and setbacks" but specific figures were not extractable via search. Needs direct confirmation or review of the full ordinance on Municode. setback from your property line.
Delivery to Enigma
Metal garage delivery to Enigma can take about 1 to 2 weeks. Use that time to take care of permits and get the site ready if work is needed beforehand. If you're hiring someone for grading or concrete, coordinate those jobs around the delivery schedule instead of trying to squeeze everything in at the last minute.
Representative product photo — a Berrien County-specific project photo is pending (rotates in from Trey's weekly upload per the freshness cadence).
FAQ
Can I use my metal garage as a workshop too?
Definitely! Just plan for the workshop before deciding on the garage size. A workbench, toolboxes, shelving and equipment can eat up a lot of floor space, especially when you're also parking a vehicle inside. Make sure to give yourself enough room to work comfortably instead of trying to fit a workshop into whatever space happens to be left over.
What can I keep in a metal garage?
Cars and trucks are obvious, but metal garages can also hold lawn equipment, tools, recreational gear and general storage. Larger buildings can leave room for work areas, too. Make a list of what you intend to keep inside before choosing the building size. It's easy to underestimate how quickly floor space disappears.
Can my metal garage have windows and different doors?
The available configuration depends on the garage package, but doors and windows should be considered while you're planning the layout. Think about where vehicles will enter, where you want a regular walk door and whether natural light is needed inside. Making those decisions early helps you choose a layout that works instead of adding features wherever they'll fit.
How much extra room should I allow around my vehicles?
Don't measure a car and make the garage barely wider than the vehicle. You need enough room to open the doors, get in and out, walk around it and reach anything stored nearby. With two vehicles, remember the space between them too. Adding a little breathing room during planning can make a big difference once you use the garage every day.
Can I put a metal garage beside my house?
You may be able to, but don't assume every open spot on the property is buildable. Berrien County Code Enforcement Office (Planning and Zoning) has requirements that can affect garage placement, including a current setback of Not confirmed — the county notes its zoning ordinance "includes...building size and setbacks" but specific figures were not extractable via search. Needs direct confirmation or review of the full ordinance on Municode.. Check the rules for your address before choosing the location, particularly if you're working with limited room between the house and property line.
Can I use a metal garage just for storage?
Yes. Cars don't have to be part of the equation at all. A metal garage can give you enclosed space for tools, lawn equipment, recreational gear and other belongings. If storage is the main purpose, think about shelving and aisle space while planning the building so everything remains accessible once the garage starts filling up.
Do I need a permit for a metal garage in Enigma?
That depends on the garage and the requirements of Berrien County Code Enforcement Office (Planning and Zoning). The current rule requires a permit once the garage exceeds Not found — no published sqft exemption for accessory structures located on the county site. The office does issue building permits generally, but no specific threshold was found. Needs direct confirmation (229-686-2149, option 2). square feet. Check before doing any permanent site work. There may be other requirements tied to your property as well, so getting an answer early can save you from having to change plans later.
Should I pour the concrete before ordering the garage?
Get the garage specifications nailed down first. You want to know the correct dimensions and make sure the planned location meets the rules for Enigma before putting permanent concrete in the ground. It's much easier to adjust a garage plan on paper than to deal with a slab that was poured in the wrong place or at the wrong size.
Definitions
- ◦ Clear Span
- Open floor space between the building's exterior supports without interior columns getting in the way.
- ◦ Wall Panel
- Formed metal sheet used to enclose and protect the exterior walls of the garage.
- ◦ Setback
- The required amount of space between your garage and a property line, road or another boundary covered by local rules.
- ◦ Gable
- The triangular wall section found at the end of a building with a pitched roof.
- ◦ Overhead Door
- The large door that opens upward to let cars, trucks or equipment move in and out of the garage.
- ◦ Building Permit
- Approval from the local government to construct a building under the building and zoning rules that apply to the property.
- ◦ Trim
- The finished metal pieces used along corners, roof edges, openings and other transitions on the building.
- ◦ Eave Height
- The height of the sidewall measured to the point where the wall and roof meet.
- ◦ Concrete Slab
- A flat poured-concrete surface commonly used as the finished floor and part of the foundation system for a garage.
- ◦ Building Footprint
- The amount of ground the garage takes up, based on its outside width and length.
Enigma, Berrien County — At a Glance
- Permit Authority Name
- Berrien County Code Enforcement Office (Planning and Zoning)
- Permit Authority Url
- https://berriencountygeorgia.com/planning-and-zoning/
- Permit Threshold Sqft
- Not found — no published sqft exemption for accessory structures located on the county site. The office does issue building permits generally, but no specific threshold was found. Needs direct confirmation (229-686-2149, option 2).
- Setback Feet Side Rear
- Not confirmed — the county notes its zoning ordinance "includes...building size and setbacks" but specific figures were not extractable via search. Needs direct confirmation or review of the full ordinance on Municode.
- Wind Load Zone
- Inland Georgia — roughly 110-120 mph (ASCE 7, Exposure C). NOT a verified figure; exact design wind speed depends on the ASCE 7 edition Berrien County has adopted and must be confirmed with a GA-licensed engineer or the county building official.
- Coastal
- Drive Miles
- 156.9
- Drive Minutes
- 215
- Nearby Towns
- Gladys, Glory, Alapaha, Allenville
- Delivery Weeks In Stock
- 1
- Delivery Weeks Custom
- 2
- Panel Type Gauge
- 29-gauge and 26-gauge Rib panels -- Benton's existing standard gauge/profile for pole-barn, carport, and agricultural structures.
- Color Count
- 7
Why Benton Metal Depot
Benton Metal Depot has been working with metal building products in Statesboro since 2004. That local experience is important when you're planning a garage in Enigma and trying to sort through materials, building specifications and the rest of the project details. Benton works with homeowners, contractors and property owners throughout the region.
Ready to talk through your metal garages project in Enigma?
Sources
- Internal: category-data.php (pole-barns / agricultural-pole-barns copy) (2026)
- color-collection.php Weather XL Rib/PBR color chart: Polar White, Pebble Gray, Granite, Onyx, Vanilla, Sand, Chocolate (29ga; 5 of the 7 also available in 26ga). Real Benton color count for this panel line -- not confirmed as the specific palette Jim/Trey intend to offer for metal garages. (2026)
- https://berriencountygeorgia.com/planning-and-zoning/ (2026)
- General ASCE 7 inland-Georgia range (aggregated secondary sources) — no county-specific or primary map source found (2026)
- Berrien County is inland (south-central GA) and is not among the coastal counties named in the client spec (2026)
- Computed 2026-09-16: GeoNames zip centroid -> OSRM public routing engine (real driving route from Statesboro, Bulloch County, GA). Deterministic and reproducible, but a free public demo routing server, not Google Maps -- spot-check a sample before confirming. (2026)
- Computed 2026-09-16: same OSRM routing result as drive_miles, converted from seconds. (2026)
- Computed 2026-09-16: 4 nearest cities in benton_service_area_cities.php by straight-line (haversine) distance from zip centroid. (2026)
- Bulk-set via dev-fact-review.php (2026)
