Metal Garages in Jennie 2026 | Benton Metal Depot

Reviewed by the Benton Metal Depot team · Updated October 1, 2026

For some residents in Jennie, a metal garage means covered parking. For others, it's where the lawn equipment, tools and weekend projects end up. Benton Metal Depot supplies metal garage packages throughout Evans, so the building can be planned around the job it needs to do on your property.

Key Points

◦Benton serves Edna, Undine, Bellville and Hagan and other communities around Jennie.
◦In Jennie, a building permit is required once the garage exceeds No explicit sqft exemption published on the county site. Georgia's statewide 2024 IRC baseline exempts one-story detached accessory structures ≤200 sq ft (Section R105.2) absent a stricter local amendment — not confirmed whether Evans County has one. Needs direct county contact. square feet.
◦Check the permit and setback rules before deciding exactly where the garage will go.
◦Plan for door clearance and walking room when deciding how wide your garage needs to be.
◦The current local setback for a metal garage is Not found — no Evans County zoning ordinance or accessory-structure setback table was locatable online (no Municode/Zoneomics entry found). Needs direct confirmation with the county..

At a Glance

Permit threshold	No explicit sqft exemption published on the county site. Georgia's statewide 2024 IRC baseline exempts one-story detached accessory structures ≤200 sq ft (Section R105.2) absent a stricter local amendment — not confirmed whether Evans County has one. Needs direct county contact. As of 2026 · Source
Setback (side/rear)	Not found — no Evans County zoning ordinance or accessory-structure setback table was locatable online (no Municode/Zoneomics entry found). Needs direct confirmation with the county. As of 2026 · Source
Wind load zone	Inland Georgia — roughly 115-120 mph (ASCE 7, Exposure C). NOT a verified figure; needs confirmation with a GA-licensed engineer or the county building official. As of 2026 · Source
Panel type/gauge	29-gauge and 26-gauge Rib panels -- Benton's existing standard gauge/profile for pole-barn, carport, and agricultural structures. As of 2026 · Source
Drive time from Statesboro	33 As of 2026 · Source

Call (912) 489-5795 Design in 3D

Permits & Setbacks in Evans County

Evans treats a metal garage like any other accessory structure: under No explicit sqft exemption published on the county site. Georgia's statewide 2024 IRC baseline exempts one-story detached accessory structures ≤200 sq ft (Section R105.2) absent a stricter local amendment — not confirmed whether Evans County has one. Needs direct county contact. square feet, Evans County Code Enforcement (permit/building services), Claxton, GA typically doesn't require a full permit, but the Not found — no Evans County zoning ordinance or accessory-structure setback table was locatable online (no Municode/Zoneomics entry found). Needs direct confirmation with the county. setback rule still governs where it can sit on the lot.

Delivery to Jennie

Metal garage delivery to Jennie can take about 1 to 2 weeks. Use that time to take care of permits and get the site ready if work is needed beforehand. If you're hiring someone for grading or concrete, coordinate those jobs around the delivery schedule instead of trying to squeeze everything in at the last minute.

Representative product photo — a Evans County-specific project photo is pending (rotates in from Trey's weekly upload per the freshness cadence).

FAQ

Do I need a permit for a metal garage in Jennie?

That depends on the garage and the requirements of Evans County Code Enforcement (permit/building services), Claxton, GA. The current rule requires a permit once the garage exceeds No explicit sqft exemption published on the county site. Georgia's statewide 2024 IRC baseline exempts one-story detached accessory structures ≤200 sq ft (Section R105.2) absent a stricter local amendment — not confirmed whether Evans County has one. Needs direct county contact. square feet. Check before doing any permanent site work. There may be other requirements tied to your property as well, so getting an answer early can save you from having to change plans later.

Can I use a metal garage just for storage?

Yes. Cars don't have to be part of the equation at all. A metal garage can give you enclosed space for tools, lawn equipment, recreational gear and other belongings. If storage is the main purpose, think about shelving and aisle space while planning the building so everything remains accessible once the garage starts filling up.

Are metal garages a good choice for Georgia?

Metal buildings are utilized throughout Georgia for garages, equipment storage and other residential, agricultural and commercial uses. The important thing is choosing a building appropriate for the project and location. If you're building in Jennie, make sure the garage specifications and site plan also meet the local requirements that apply to the property.

What do I need to do to my property before the garage arrives?

First, decide exactly where the garage will go and check the permit and setback requirements with Evans County Code Enforcement (permit/building services), Claxton, GA. Then follow the site requirements for the garage you've selected. Any grading, concrete or other preparation should be based on the final building specifications. Don't prepare the site using rough dimensions if the building hasn't been finalized.

Can I use my metal garage as a workshop too?

Definitely! Just plan for the workshop before deciding on the garage size. A workbench, toolboxes, shelving and equipment can eat up a lot of floor space, especially when you're also parking a vehicle inside. Make sure to give yourself enough room to work comfortably instead of trying to fit a workshop into whatever space happens to be left over.

What can I keep in a metal garage?

Cars and trucks are obvious, but metal garages can also hold lawn equipment, tools, recreational gear and general storage. Larger buildings can leave room for work areas, too. Make a list of what you intend to keep inside before choosing the building size. It's easy to underestimate how quickly floor space disappears.

Can my metal garage have windows and different doors?

The available configuration depends on the garage package, but doors and windows should be considered while you're planning the layout. Think about where vehicles will enter, where you want a regular walk door and whether natural light is needed inside. Making those decisions early helps you choose a layout that works instead of adding features wherever they'll fit.

How far is Benton Metal Depot from Jennie?

Benton Metal Depot's Statesboro location is approximately 21.4 miles from Jennie. The company serves residents throughout Evans, including communities such as Edna, Undine, Bellville and Hagan. Current delivery time for a metal garage to the Jennie area is about 1 to 2 weeks.

Definitions

◦ Eave Height: The height of the sidewall measured to the point where the wall and roof meet.
◦ Trim: The finished metal pieces used along corners, roof edges, openings and other transitions on the building.
◦ Building Permit: Approval from the local government to construct a building under the building and zoning rules that apply to the property.
◦ Overhead Door: The large door that opens upward to let cars, trucks or equipment move in and out of the garage.
◦ Gable: The triangular wall section found at the end of a building with a pitched roof.
◦ Setback: The required amount of space between your garage and a property line, road or another boundary covered by local rules.
◦ Wall Panel: Formed metal sheet used to enclose and protect the exterior walls of the garage.
◦ Clear Span: Open floor space between the building's exterior supports without interior columns getting in the way.
◦ Roof Pitch: How steep the roof is, usually described by how much it rises over a set horizontal distance.
◦ Fastener: A screw or other connector used to hold metal panels and building components securely in place.

Jennie, Evans County — At a Glance

Permit Authority Name: Evans County Code Enforcement (permit/building services), Claxton, GA
Permit Authority Url: https://evanscounty.org/departments/code-enforcement/
Permit Threshold Sqft: No explicit sqft exemption published on the county site. Georgia's statewide 2024 IRC baseline exempts one-story detached accessory structures ≤200 sq ft (Section R105.2) absent a stricter local amendment — not confirmed whether Evans County has one. Needs direct county contact.
Setback Feet Side Rear: Not found — no Evans County zoning ordinance or accessory-structure setback table was locatable online (no Municode/Zoneomics entry found). Needs direct confirmation with the county.
Wind Load Zone: Inland Georgia — roughly 115-120 mph (ASCE 7, Exposure C). NOT a verified figure; needs confirmation with a GA-licensed engineer or the county building official.
Coastal
Drive Miles: 21.4
Drive Minutes: 33
Nearby Towns: Edna, Undine, Bellville, Hagan
Delivery Weeks In Stock: 1
Delivery Weeks Custom: 2
Panel Type Gauge: 29-gauge and 26-gauge Rib panels -- Benton's existing standard gauge/profile for pole-barn, carport, and agricultural structures.
Color Count: 7

Why Benton Metal Depot

Buying a garage isn't just a matter of picking a picture and choosing a size. You also have to think about what you're putting inside, where it will sit and what materials the project needs. Benton Metal Depot works with residents in Jennie and throughout the region to help them choose a garage package that will work well with whatever they need.

Ready to talk through your metal garages project in Jennie?

Call (912) 489-5795

Sources

Other Cities We Serve in Evans County

See the Evans County hub for metal garages

Bellville Claxton Daisy Daniels Edna Hagan Jennie Undine

Call Design

High-quality metal roofing installation example by Benton Metal Depot

Get Started

Let our team work with you and in turn, earn you more business. We strive to provide our service the right way, offering quality products at competitive prices. You can be assured that we will give you an unmatched customer service just as you expect.

Premium metal roofing panels engineered for weather resistance
Architectural metal siding for modern aesthetic appeal
Residential & commercial project solutions
Satisfaction materials with exceptional longevity

Get Your Free Metal Building Quote

Tell us a bit about your project and we'll get back to you with a custom quote — no obligation, no pressure.

Full Name *

Phone Number *

Email Address *

Project Details *

Get a Quick Quote

Metal Garage for your Metal Garages in Jennie, Evans County, Georgia (2026)